  +86-13921965537
  +86-0512-58990020
GPO3 Busbar Support — Machined Insulator Supports To Your Drawing
You are here: Home » Products » METAL WORKS » SHEET METAL PARTS » GPO3 Busbar Support — Machined Insulator Supports To Your Drawing

PRODUCT CATEGORY

loading

Share to:
sharethis sharing button

GPO3 Busbar Support — Machined Insulator Supports To Your Drawing

These GPO3 busbar supports are machined from glass-reinforced polyester laminate to your drawing. Each part is cut, milled and drilled to the finger spacing, slot pattern and hole pitch your busbars and terminal studs need, with clean edges and no delamination. Parts are made to order in the quantities you actually use.
Availability:
Quantity:

1. Dielectric Strength Where It Matters

GPO3 is a glass-reinforced thermoset built for electrical insulation, not a general-purpose plastic. It holds off phase-to-phase and phase-to-earth voltage at the busbar joints, and keeps that insulation after machining because the laminate is solid through its thickness, not a coating.

2. Ribbed Fingers Hold Bar Spacing

The multi-finger profile sets the gap between bars and keeps it fixed when short-circuit forces pull them together. Fingers, steps and shoulders are machined to your bar width and thickness, so bars sit in the support instead of being shimmed into place.

3. Creepage Distance in a Tight Space

Ribs, steps and slots add creepage and clearance without adding length to the assembly. In a crowded panel, that is the difference between meeting the required distance and rebuilding the layout around it.

4. Machined to Your Drawing, Not to a Catalogue

Slots, cut-outs, counterbores, tapered ends and asymmetric profiles are all produced from your DXF, PDF or sample. Mixed part numbers can be run together, so a panel's worth of supports, barriers and terminal boards arrives as one matched set.

5. Low Moisture Pick-Up, Stable Dimensions

GPO3 takes up very little moisture, so parts stay flat and keep their hole pitch in humid or unheated cabinets. Barriers do not swell against the busbar, and stud holes do not tighten or loosen as the seasons change.

6. Samples in 3–4 Weeks, Production in 4–6 Weeks

New profiles are sampled in three to four weeks from drawing approval, with production running four to six weeks after that. Engineers answer within 24 hours, 365 days a year, and small batches are treated as normal work.

Technical Parameters

Place of Origin

Jiangsu, China

Material Capabilities

GPO-3 (UPGM203) Fiberglass Reinforced Polyester La

General Tolerances

±1mm (customizable per drawing requirement)

Material Color

White / Red (optional)

Processing Type

CNC milling, drilling, cutting, punching

Thickness Range

10mm-50mm

Flame Rating

UL94 V-0

Customization

Size, shape, hole position, surface treatment all customizable

Application

Busbar support, insulation spacer, phase barrier, arc chute...
Show more


Product Uses

1. Busbar Supports in Switchboards

Holds main and distribution bars at fixed centres inside panels, switchboards and busbar chambers. One support carries several poles, so bar spacing stays parallel along the run and the assembly resists the pull of a fault current.

2. Insulating Barriers and Phase Separators

Separates phases, and separates live parts from the enclosure, in distribution boards and control cabinets. Cut to the compartment shape so the barrier closes the gap instead of leaving an edge to work around.

3. Terminal Boards and Mounting Bases

Acts as the insulating base for terminal studs, links, sensors and small devices. Hole pattern follows your terminals, and counterbores keep stud heads below the surface where clearance is tight.

FAQ

1.Is your company trading or manufacturing?
Our company is manufacturer.

2.What are your company's advantages?
Our company has 20 years manufacture experience in the area of wire harness and enclosure. We can provide high quality products, fast response, professional suggestions and deliver on time also price competitive is our key job.

3.Can you do customized wire harness and enclosure?
Yes, we mainly do customized products and don't have huge MOQ, for wire harness MOQ=100PCS, for enclosure MOQ=10PCS

4.Where are your main customers located?
We mainly sell our wire harness and enclosure to USA, Europe and Oceania. High quality products are our advantage. Some world famous customers are TE connectivity, Nexteer and VAST.

5.Do you have some quality management certification?
Our company had passed TS16949 in the year of 2009, also we have CE certification for enclosure.

Previous: 
Next: 
OUR company is professional manufacturer of wire harness and enclosure.

QUICK LINK

PRODUCTS

CONTACT US

  +86-0512-58990020
  +86-13921965537
   NO.1 East of Tanglian Road,tangshi Town, Zhangjiagang Economic Development Area 215618, jiangsu , China
All rights reserved  © 2021  jiangsu huikun technology co.,ltd           苏ICP备2021006829号-1         Support By Leadong