  +86-13921965537
  +86-0512-58990020
Custom Copper Busbar - Bent, Punched And Tinned To Your Drawing
You are here: Home » Products » METAL WORKS » SHEET METAL PARTS » Custom Copper Busbar - Bent, Punched And Tinned To Your Drawing

PRODUCT CATEGORY

loading

Share to:
sharethis sharing button

Custom Copper Busbar - Bent, Punched And Tinned To Your Drawing

These custom copper busbars are formed conductors cut, punched and bent to your drawing. Every bar is made from pure copper and can be supplied bare or tinned, with deburred edges, holes on your pitch, and optional insulation sleeving or heat-shrink in your phase colours. Bars are checked against the drawing before packing.
Availability:
Quantity:

1. Pure Copper, No Mixed-Metal Joint

Every bar is made from pure copper, with no friction-welded or explosive-welded transition anywhere on the part. There is no dissimilar-metal interface to corrode or to run hot under load, and the current path stays uniform from lug to lug.

2. Formed and Punched to Your Drawing

Straight runs, single or multi-stage bends, offsets, U, Z and J shapes, twisted sections and stacked pairs are all produced to your drawing or sample. Hole size, pitch and edge distance follow your terminal, breaker and busbar clamp dimensions, so bars drop in without rework.

3. Deburred Edges and Clean Holes

Bars are deburred after punching and cutting. Burrs and torn hole edges are where contact resistance climbs and where insulation gets cut during assembly, so edges are dressed and hole positions are checked against the drawing before the bar moves on.

4. Tinned, Sleeved and Phase-Marked

Bars are supplied bare or tin-plated, so the contact lands stay bright and solderable instead of oxidising on the shelf. Heat-shrink sleeving or colour-coded insulation can be applied to your phase convention, cut to your exposed-contact length so the terminal land stays clear for the connection.

5. Samples in 3–4 Weeks, Production in 4–6 Weeks

New shapes are sampled in three to four weeks from drawing or sample approval, with production running four to six weeks after that. Quoted lead times are the ones we work to, and engineers answer within 24 hours, 365 days a year.

6. Small Batches and One-Off Shapes

Non-standard quantities are normal work here — a single replacement bar for an old switchboard is handled the same way as a production run. Mixed shapes, sizes and thicknesses can be packed together per panel or per project.

Technical Parameters

Model Number

customizable

Place of Origin

Jiangsu, China

Brand Name

customizable

Material

Copper

Surface Treatment

Tin Plated / Bare Copper

Processing Type

CNC Punching, Bending, Cutting

Thickness Range

3mm-10mm (customizable)

Width Range

20mm-100mm (customizable)

Conductivity

≥97% IACS (T2 copper)

Rated Current

100A-5000A (custom per size)

Customization

Full custom size, shape, hole position per drawing

Application

Switchgear, distribution cabinet, transformer, energy storage...


Product Uses

1. Panel and Switchboard Links

Connects breakers, fuse holders, terminal blocks and outgoing bars inside panels and switchboards. Offsets and multi-stage bends route the bar around devices and clear of live parts without adding a joint.

2. Battery, Inverter and DC Links

Forms the short interconnects between batteries, inverters, chargers and DC distribution. Wide flat sections carry the current with lower voltage drop than cable, and hole spacing matches the terminal posts.

3. Earthing and Neutral Bars

Multi-hole bars serve as earth and neutral links in distribution boards and cabinets. Hole count, pitch and bar cross-section follow your schema, and the bar can be drilled to suit the terminals you already stock.

FAQ

1.Is your company trading or manufacturing?
Our company is manufacturer.

2.What are your company's advantages?
Our company has 20 years manufacture experience in the area of wire harness and enclosure. We can provide high quality products, fast response, professional suggestions and deliver on time also price competitive is our key job.

3.Can you do customized wire harness and enclosure?
Yes, we mainly do customized products and don't have huge MOQ, for wire harness MOQ=100PCS, for enclosure MOQ=10PCS

4.Where are your main customers located?
We mainly sell our wire harness and enclosure to USA, Europe and Oceania. High quality products are our advantage. Some world famous customers are TE connectivity, Nexteer and VAST.

5.Do you have some quality management certification?
Our company had passed TS16949 in the year of 2009, also we have CE certification for enclosure.

Previous: 
Next: 
OUR company is professional manufacturer of wire harness and enclosure.

QUICK LINK

PRODUCTS

CONTACT US

  +86-0512-58990020
  +86-13921965537
   NO.1 East of Tanglian Road,tangshi Town, Zhangjiagang Economic Development Area 215618, jiangsu , China
All rights reserved  © 2021  jiangsu huikun technology co.,ltd           苏ICP备2021006829号-1         Support By Leadong